| Influence of WS2/SnS2 on the tribological performance of copper-free brake pads |
13 |
| Experimental analysis of tribological properties of ultrasonically dispersed garnet nanoparticles in SN500 grade lubricating oil |
10 |
| Investigations on tribological behaviour of AA7075-TiO2 composites under dry sliding conditions |
9 |
| Tribological behavior of AA7075-TiC composites by powder metallurgy |
8 |
| Sustainable machining. Modeling and optimization of temperature and surface roughness in the milling of AISI D2 steel |
8 |
| Investigation on tribological and corrosion characteristics of oxide-coated steel and mild steel fiber-based brake friction composites |
8 |
| Tribological performance and self-lubricating mechanism of the laser-textured surface filled with solid lubricant in rolling friction pair |
6 |
| Effects of surface topography on hydrodynamic performance of liquid film seals considering cavitation |
5 |
| The effect of rounding radius in bump foil structure on the static performance of foil journal bearings |
5 |
| Study on the tribological behaviors of copper nanoparticles in three kinds of commercially available lubricants |
5 |
| Online condition monitoring of misaligned meshing gears using wear debris and oil quality sensors |
5 |
| Preparation and tribological properties of Ag nanoparticles/reduced graphene oxide nanocomposites |
4 |
| Taguchi approach to erosion wear optimization of WC-10Co-4Cr sprayed austenitic steel subjected to equisized slurry |
4 |
| Experimental investigation of the magnetorheological polishing process with roller |
4 |
| Effect of lubricant ageing on lubricants' physical and chemical properties and tribological performance; Part I: effect of lubricant chemistry |
4 |
| Vibration and critical characteristics of the tilting pads journal bearing-rotor system |
4 |
| Tribological properties of ultrahigh-molecular-weight polyethylene (UHMWPE) composites reinforced with different contents of glass and carbon fibers |
4 |
| Multi-scale surface patterning - an approach to control friction and lubricant migration in lubricated systems |
4 |
| Experimental investigation of tribological effect on vegetable oil with CuO nanoparticles and ZDDP additives |
4 |
| Tribological effects of laser surface texturing and residual stress |
4 |
| Preparation and tribological properties of BN/calcium borate nanocomposites as additive in lubricating oil |
3 |
| Effect of cage dynamic unbalance on the cage's dynamic characteristics in high-speed cylindrical roller bearings |
3 |
| Enhancing the wear resistance of WC-Co cutting inserts using synthetic diamond coatings |
3 |
| Porous exponential slider bearings lubricated with MHD-couple stress fluid |
3 |
| Experimental comparison between the Stribeck curves of water lubricated rubber bearing with straight and spiral grooves |
3 |
| Analysis of dynamic characteristics of spiral groove liquid film seal considering cavitation |
3 |
| Fabrication and tribological study of AA6061 hybrid metal matrix composites reinforced with SiC/B4C nanoparticles |
3 |
| Gear fault diagnosis based on a new wavelet adaptive threshold de-noising method |
3 |
| Computational fluid dynamic study on the tribological performance of dimple-textured surface fabricated using the turning process |
3 |
| Study the formation of mechanically mixed layer and subsurface behavior of worn-out surfaces of aged hybrid metal matrix composites |
3 |
| Evaluation of parameters for application of Laser Surface Texturing (LST) in tooling for the sheet-metal forming process |
3 |
| Effect of laser surface texturing on tribological properties of polyimide composites in the application of traveling wave rotary ultrasonic motor |
3 |
| Investigation of material removal rate and surface roughness using multi-objective optimization for micro-milling of inconel 718 |
3 |
| Effect of MoS2 on transfer film formation and friction coefficients in NAO friction material |
3 |
| Improved hydrodynamic performance of liquid film seal by considering boundary slip and cavitation |
3 |
| Rheological behavior of lithium grease with CNTs/GNPs hybrid nanocomposite as an additive |
3 |
| Numerical analysis of water-lubricated thrust bearing with groove texture considering turbulence and cavitation |
3 |
| Microstructure and tribological property of self-lubrication CBN abrasive composites containing molybdenum disulfide |
3 |
| Performance comparison of hole-entry and slot entry hybrid journal bearings considering combined influence of thermal effects and micropolar lubricant |
3 |
| On hydrodynamic lubrication characteristics of ferrofluid film in a spiral groove mechanical seal |
3 |
| Size effect on thermal elastohydrodynamic lubrication of industrial chain bush-pin hinge pair |
3 |
| The effect of fiber orientation on wear behavior of glass fiber-epoxy filled with particles |
3 |
| Synthesis and tribological properties of nanogrease |
3 |
| Analysis on the steady state performance of a multi pad externally adjustable fluid film bearing |
3 |
| Comparative study of materials for friction pairs in a new high water-based hydraulic motor with low speed and high pressure |
2 |
| Study on the influence of round pits arrangement patterns on tribological properties of journal bearings |
2 |
| Evaluation of tribological properties of Ceiba pentandra (kapok) seed oil as an alternative lubricant |
2 |
| Numerical study on steady state performance enhancement of partial textured hydrodynamic journal bearing |
2 |
| Lubrication regime analysis for spherical pump |
2 |
| Tribological properties of the epoxy resin-based solid lubricant coating modified by Kevlar fibers |
2 |
