| Numerical analysis of the dynamic behavior of a rotor-bearing-brush seal system with bristle interference |
22 |
| Effects of extreme pressure and anti-wear additives on surface topography and tool wear during MQCL turning of AISI 1045 steel |
22 |
| Calculation of cavitation evolution and associated turbulent kinetic energy transport around a NACA66 hydrofoil |
20 |
| Gear fault feature extraction and diagnosis method under different load excitation based on EMD, PSO-SVM and fractal box dimension |
12 |
| Machining of CFRP/Ti6Al4V stacks under minimal quantity lubricating condition |
12 |
| Machine health management in smart factory: A review |
12 |
| Effect of the blade loading distribution on hydrodynamic performance of a centrifugal pump with cylindrical blades |
12 |
| Fault diagnosis method of rolling bearing using principal component analysis and support vector machine |
11 |
| Multidisciplinary robust design optimization based on time-varying sensitivity analysis |
11 |
| An adaptive flexible polishing path programming method of the blisk blade using elastic grinding tools |
11 |
| An experimental study on the cavitation vibration characteristics of a centrifugal pump at normal flow rate |
11 |
| Buckling analysis of FGM plates under uniform, linear and non-linear in-plane loading |
10 |
| Adaptive control of a vehicle-seat-human coupled model using quasi-zero-stiffness vibration isolator as seat suspension |
10 |
| Experimental investigation of cutting force, surface roughness and tool wear in high-speed dry milling of AISI 4340 steel |
10 |
| Integrated modeling and simulation of vehicle and human multi-body dynamics for comfort assessment in railway vehicles |
10 |
| Nanofluid thin film flow and heat transfer over an unsteady stretching elastic sheet by LSM |
10 |
| A central composite design based fuzzy logic for optimization of drilling parameters on natural fiber reinforced composite |
10 |
| Calculation of time dependent mesh stiffness of helical planetary gear system using analytical approach |
9 |
| Terminal sliding mode control for full vehicle active suspension systems |
9 |
| Fault diagnosis of rolling element bearing based on artificial neural network |
9 |
| Instability analysis under part-load conditions in centrifugal pump |
9 |
| Numerical study on the internal flow characteristics of an axial-flow pump under stall conditions |
9 |
| A method for rapidly evaluating reliability and predicting remaining useful life using two-dimensional convolutional neural network with signal conversion |
8 |
| Multiparameter optimization for the nonlinear performance improvement of centrifugal pumps using a multilayer neural network |
8 |
| Skidding analysis of angular contact ball bearing subjected to radial load and angular misalignment |
8 |
| The application of a regularization method to the estimation of geometric errors of a three-axis machine tool using a double ball bar |
8 |
| Kinematic response of industrial robot with uncertain-but-bounded parameters using interval analysis method |
8 |
| A rule-based classifier ensemble for fault diagnosis of rotating machinery |
8 |
| Simultaneous multi-objective optimization of stainless steel clad layer on pressure vessels using genetic algorithm |
8 |
| Optimal design of an MR damper valve for prosthetic knee application |
8 |
| Numerical investigation of dynamic behavior of a compound drop in shear flow |
7 |
| Design and evaluation of a 7-DOF cable-driven upper limb exoskeleton |
7 |
| Numerical modeling of internal flow in a fluidic oscillator |
7 |
| Flexible CNC polishing process and surface integrity of blades |
7 |
| Compound fault diagnosis of bearings using improved fast spectral kurtosis with VMD |
7 |
| Numerical investigation of heat transfer and friction factor in ribbed triangular duct solar air heater using Computational fluid dynamics (CFD) |
7 |
| Cutting force, tool wear and surface roughness in high-speed milling of high-strength steel with coated tools |
7 |
| Design and analysis of a new magneto rheological damper for washing machine |
7 |
| Topology optimization of material microstructures using energy-based homogenization method under specified initial material layout |
7 |
| An architecture of deep learning network based on ensemble empirical mode decomposition in precise identification of bearing vibration signal |
7 |
| Characterization & evaluation of Al7075 MMCs reinforced with ceramic particulates and influence of age hardening on their tensile behavior |
7 |
| Effect of clearances in rolling element bearings on their dynamic performance, quality and operating life |
7 |
| Laser beam machining of zirconia ceramic: An investigation of micro-machining geometry and surface roughness |
7 |
| Multiple model-based detection and estimation scheme for gas turbine sensor and gas path fault simultaneous diagnosis |
7 |
| Development of PMMA/TiO2 nanocomposites as excellent dental materials |
7 |
| Entropy generation analysis for multi-walled carbon nanotube (MWCNT) suspended nanofluid flow over wedge with thermal radiation and convective boundary condition |
7 |
| Static stiffness characteristics of a new non-pneumatic tire with different hinge structure and distribution |
7 |
| Prediction of ship fuel consumption by using an artificial neural network |
6 |
| A mixed FEM and lumped-parameter dynamic model for evaluating the modal properties of planetary gearboxes |
6 |
| An experiment investigation on the effect of Coulomb friction on the displacement transmissibility of a quasi-zero stiffness isolator |
6 |
