| Fuzzy Fatigue Reliability Analysis and Optimization of A-Type Frame of Electric Wheel Dump Truck Based on Response Surface Method |
8 |
| Concave Design for High-Moisture Corn Ear Threshing |
4 |
| The effect of Diesel-Methanol Blends with Volumetric Proportions on the Performance and Emissions of a Diesel Engine |
4 |
| Optimization and Prediction of Durability and Utility Features of Three-Layer Piezoelectric Transducers |
4 |
| Investigation of Mechanical Properties of Hemp and Flax Fibers Hybrid Composites for Biomedical Applications |
3 |
| Dynamic Indicators of a Corn Ear Threshing Process Influenced by the Threshing-Separation Unit Load |
3 |
| Finite Element Analysis of Dynamic Fracture Behaviour of Drill Pipe under Various Impact Loads |
2 |
| Experimental and Numerical Investigation of the Effect of Different Temperature and Deformation Speeds on Mechanical Properties and Springback Behaviour in Al-Zn-Mg-Cu Alloy |
2 |
| New Method for Evaluation of Radial Crush Strength of Paper Cores |
2 |
| Analysis of Influence of Types of Rocks Forming the Goaf with Caving on the Physical Parameters of Air Stream Flowing Through These Gob and Adjacent Headings |
2 |
| Simulation and Research of the Nozzle with an Ultrasonic Resonator for Spraying Polymeric Materials |
2 |
| Curvilinear Stress-Strain Relationship for Concrete of EN-2 Regulation in the ZI Method and the Calculation of Beam Strength |
2 |
| Effect of Temperatures and Pulling Rates on Microstructure and Mechanical Properties of 6061 Aluminium Alloy in Directional Solidification |
2 |
| Research on Mathematical Model and Cutting Characteristics in Machining of Natural Marble by Diamond Coated Tool |
2 |
| An Immersed Boundary Method for Computational Simulation of Red Blood Cell in Poiseuille Flow |
2 |
| Optimization of Hydrostatic Thrust Bearing Using Enhanced Grey Wolf Optimizer |
2 |
| Investigation of Wave Processes in a Rectangular Region with Discontinuous Boundary Conditions |
2 |
| The Impact of Airway Geometry on the Distribution of Methane Concentrations at the Outlet from a Longwall |
2 |
| Dynamic Modeling and Simulation of Flexible Beam Finite Rotation with ANCF Method and FFR Method |
2 |
| Influence of Structure and Physical-Mechanical Characteristics of Threads on the Strength of Binding the Books |
1 |
| Using a Non-Conforming Meshes Method to Simulate an Interaction Between Incompressible Flow and Rigid and Elastic Boundaries |
1 |
| Thermal Fatigue Analyses of Riveted Structures |
1 |
| Interpolation Type Stress Recovery Technique Based Error Estimator for Elasticity Problems |
1 |
| Compliance and Fatigue Life Analysis of U-shape Flexure Hinge |
1 |
| Experimental Investigation of Water Droplet Heating in Humidified Air Flow |
1 |
| Analysis of Ultimate Load-Carrying Capacity of Combined Connection with Bolts and Welds |
1 |
| Experimental and Numerical Investigation of Adhesively Bonded Curved Lap Joints under Three-Point Bending |
1 |
| Operation of Passive Fluid Self-Balancing Device at Resonance Transition Regime |
1 |
| Rolling Bearing Fault Detection Using Autocorrelation Based Morphological Filtering and Empirical Mode Decomposition |
1 |
| The Application of Model-Based Tests for Analysing the Consequences of Methane Combustion in a Mine Heading Ventilated Through a Forcing Air Duct |
1 |
| Experimental Study of Multi-Magnet Excitation for Enhancing Micro-Power Generation in Piezoelectric Vibration Energy Harvester |
1 |
| Design and Development of a Novel Independent Wheel Torque Control of 4WD Electric Vehicle |
1 |
| Study on Swing Movable Teeth Drive with External Generating Wave Mode |
1 |
| Piezoelectric Cantilevers for Energy Harvesting with Irregular Design of the Cross Sections |
1 |
| Fuzzy Control of Active Suspension System using Full Car Model |
1 |
| Simulation of 8x8 Heavy Duty Truck for Evaluating Effects of Torque Converter Characteristics on Vehicle Performance |
1 |
| Shrinkage Effect on Cracking Resistance of Flexural Reinforced Concrete Members |
1 |
| Molecular Dynamics Simulation on Cavitation Bubble Collapse |
1 |
| Evaluating the Maturity of CPS in Discrete Manufacturing Shop-Floor: A Group AHP Method with Fuzzy Grade Approach |
1 |
| Development and Fuzzy Sliding Mode Compensation Control of a Power Assist Lower Extremity Exoskeleton |
1 |
| Numerical Investigation of Hydrodynamics Induced by a Pitched Blade Turbine: Effect of the Shape of Vessel Base |
1 |
| Optimization with Taguchi Method of Influences on Surface Roughness of Cutting Parameters in CNC Turning Processing |
1 |
| Mechanical Properties and Microstructure of Aluminium Alloy AW6082-T6 Joints Welded by Double-Sided MIG Process before and after Aging |
1 |
| An Investigation into Property Variances Between Outer and Inner HDPE Pipe Layers |
1 |
| Near Net Shape Spur Gear Forging Using Concave Preform |
1 |
| Effect of Additional Air Supply for Combustion of Straight Vegetable Oil Blends on Performance of Mini Hot Water Generator |
1 |
| Design and Study of a Dispenser for the Introduction of the Main Batch of Mineral Fertilizers |
1 |
| Numerical Simulation of the Drill String Buckling Behavior in Horizontal Wells Considering the Orthotropic Friction |
1 |
| Dynamic Response of the full-scale Straddle-type Monorail Vehicles with Single-axle Bogies |
1 |
| Multi-Criteria Decision of W-Powder Mixed Electro Discharge Drilling Parameters using TOPSIS Approach |
1 |
