| Effect of the printing bed temperature on the adhesion of parts produced by fused filament fabrication |
24 |
| Can the melt flow index be used to predict the success of fused deposition modelling of commercial poly(lactic acid) filaments into 3D printed materials? |
20 |
| Graphene/carbon black/natural rubber composites prepared by a wet compounding and latex mixing process |
8 |
| Effect of OMMT on microstructure, crystallisation and rheological behaviour of UHMWPE/PP nanocomposites under elongation flow |
5 |
| Effect of silane treatment on the Curaua fibre/polyester interface |
4 |
| Physical and morphological characterisation of poly(L-lactide) acid-based electrospun fibrous structures: tunning solution properties |
4 |
| A Taguchi analysis on structural properties of polypropylene microcellular nanocomposite foams containing Fe2O3 nanoparticles in batch process |
4 |
| Effect of lignin on mechanical, biodegradability, morphology, and thermal properties of polypropylene/polylactic acid/lignin biocomposite |
4 |
| Crystallisation behaviour and transparency of poly(lactic acid) nucleated with dimethylbenzylidene sorbitol |
4 |
| Bacterial cellulose/hyaluronic acid composite hydrogels with improved viscoelastic properties and good thermodynamic stability |
4 |
| Interlaminar fracture toughness of a plain weave flax/epoxy composite |
3 |
| Effect of the degree of hydrolysis and polymerisation on the melting process of thermoplastic poly(vinyl alcohol) |
3 |
| A study on synergistic reinforcing effect of halloysite nanotubes/diatomite mixture-filled polymer (PP and PA6) composites |
3 |
| Properties of nylon-6-based composite reinforced with coconut shell particles and empty fruit bunch fibres |
3 |
| Flexural fatigue and failure probability analysis of polypropylene-glass hybrid fibres reinforced epoxy composite laminates |
3 |
| Effect of trigger on crashworthiness of unidirectional carbon fibre reinforced polyamide 6 composites |
3 |
| Acoustical, damping and thermal properties of polyurethane/poly(methyl methacrylate)-based semi-interpenetrating polymer network foams |
3 |
| Modification of bismaleimide resin by using -aminopropyl triethoxysilane functionalised graphene oxide |
3 |
| Enhanced mechanical and thermal properties of polyurethane/functionalised graphene oxide composites by in situ polymerisation |
3 |
| Sponge EPDM by design |
3 |
| Synthesis and properties of phosphorus and nitrogen containing intumescent flame-retardant curing agent for epoxy resin |
3 |
| Studies on mechanical, rheological, thermal and morphological properties of in situ silica-filled butadiene rubber composites |
3 |
| Development and clinical evaluation of laser-sintered ankle foot orthoses |
3 |
| rGO/CuO/PEDOT nanocomposite formation, its characterisation and electrochemical performances for supercapacitors |
3 |
| Mechanical, morphological and thermal properties of short carbon and aramid fibres-filled bromo-isobutylene-isoprene rubber vulcanised with 4' bis(maleimido)diphenylmethane |
3 |
| Investigation of thermal behaviour and mechanical property of the functionalised graphene oxide/epoxy resin nanocomposites |
3 |
| 3D Printed structural electronics: embedding and connecting electronic components into freeform electronic devices |
3 |
| Mechanical, thermal and combustion properties of intumescent flame retardant biodegradable poly (lactic acid) composites |
3 |
| Safe design fatigue life of CNT loaded woven GFRP laminates under fully reversible axial fatigue: application of two-parameters Weibull distribution |
2 |
| Selective laser sintering of polystyrene: a single-layer approach |
2 |
| Investigating the effects of processing parameters on poly(lactic acid) properties - a central composite design approach |
2 |
| The influence of zirconia fibre on ablative composite materials |
2 |
| Supercapacitor device performances of polycarbazole/graphene and polycarbazole/nanoclay/graphene nanocomposites |
2 |
| XFEM modelling of single-lap Kenaf fibre composite hybrid joints under quasi-static loading |
2 |
| Synergistic smoke suppression effect of epoxy cross-linked structure and ferrocene on epoxy-based intumescent flame-retardant coating |
2 |
| Enhancement of polystyrene composites by hyper-branched polymer-grafted nano-SiO2 |
2 |
| Synergistic effects of aluminium hypophosphite on the flame retardancy and thermal degradation behaviours of a novel intumescent flame retardant thermoplastic vulcanisate composite |
1 |
| Bismaleimides blend with a synthesised phosphorus-containing benzoxazine and its mechanical and tribological properties |
1 |
| Construction of chitosan-carboxymethyl beta-cyclodextrin silver nanocomposite hydrogel to improve antibacterial activity |
1 |
| Preparation and characterisation of hydroxyl-terminated polybutadiene-based polyurethane/graphene nanocomposites |
1 |
| Preparation and property testing of polymer blends of poly(lactic acid) and poly(butylene succinate) plasticised with long-chain fatty acids |
1 |
| Numerical simulation of double-bag progressive compression method of resin delivery in liquid composite moulding |
1 |
| Preparation and characterisation of a lamellar hydroxyapatite/polylactic acid composite |
1 |
| Effect of interfacial coating and testing conditions on the flexural performance of carbon woven fibre-reinforced polyamide laminates |
1 |
| Poly (vinyl alcohol)/graphene oxide nanocomposite films and hydrogels prepared by gamma ray |
1 |
| Preparation and properties of biodegradable poly (lactic acid)/ethylene butyl acrylate glycidyl methacrylate blends via novel vane extruder |
1 |
| Properties of Polyvinylbutyral/Vermiculite nanocomposites prepared by in-situ reaction method |
1 |
| Experimental and numerical studies on the effect of elongation rate and temperature on the mechanical behaviour of high strength NBR |
1 |
| Electrical and thermal properties of silicone rubber composites filled with Cu-coated carbon fibres and functional carbon nanotubes |
1 |
| Effect of nanoclay on mechanical and thermal properties of triblock SBS (styrene-butadiene-styrene) and its binary blend nanocomposites: comparison between polyethylene and polystyrene |
1 |
