| High performance room temperature gas sensor based on novel morphology of zinc oxide nanostructures |
15 |
| Recent advances in pseudocapacitor electrode materials: Transition metal oxides and nitrides |
14 |
| Antibacterial activities and corrosion behavior of novel PEO/nanostructured ZrO2 coating on Mg alloy |
14 |
| Mechanism and application on sulphidizing flotation of copper oxide with combined collectors |
13 |
| Mechanical and tribological behaviors of graphene/Inconel 718 composites |
13 |
| Effect of Nb additions on microstructure and properties of gamma-TiAl based alloys fabricated by selective laser melting |
13 |
| Modification of constitutive model and evolution of activation energy on 2219 aluminum alloy during warm deformation process |
12 |
| Tribological behavior of self lubricating Cu/MoS2 composites fabricated by powder metallurgy |
12 |
| Grain refinement and mechanical properties of pure aluminum processed by accumulative extrusion bonding |
11 |
| Influence of spark plasma sintering on microstructure and wear behaviour of Ti-6Al-4V reinforced with nanosized TiN |
10 |
| Influence of heat treatments on microstructure and mechanical properties of laser additive manufacturing Ti-5Al-2Sn-2Zr-4Mo-4Cr titanium alloy |
10 |
| Comparison of effect of SiC and MoS2 on wear behavior of Al matrix composites |
10 |
| Application of vibration to enhance efficiency of friction stir processing |
10 |
| Tribological and corrosion behavior of PEO coatings with graphite nanoparticles on AZ91 and AZ80 magnesium alloys |
10 |
| Effect of tool tilt angle on strength and microstructural characteristics of friction stir welded lap joints of AA2014-T6 aluminum alloy |
10 |
| Parameter optimization of microwave sintering porous Ti-23%Nb shape memory alloys for biomedical applications |
9 |
| Hot tearing behaviors and in-situ thermal analysis of Mg-7Zn-xCu-0.6Zr alloys |
9 |
| Leaching of chalcopyrite with hydrogen peroxide in hydrochloric acid solution |
9 |
| Microstructure and tribocorrosion performance of nanocrystalline TiN graded coating on biomedical titanium alloy |
8 |
| Selective flotation of smithsonite from dolomite by using novel mixed collector system |
8 |
| Structure and cavitation erosion behavior of HVOF sprayed multi-dimensional WC-10Co4Cr coating |
8 |
| Effect of post-weld heat treatment on joint properties of dissimilar friction stir welded 2024-T4 and 7075-T6 aluminum alloys |
8 |
| Quality index and hot tearing susceptibility of Al-7Si-0.35Mg-xCu alloys |
8 |
| Recent progress in Mg-Li matrix composites |
8 |
| Selective flotation of smithsonite, quartz and calcite using alkyl diamine ether as collector |
8 |
| Orientation dependence of transverse tensile properties of nickel-based third generation single crystal superalloy DD9 from 760 to 1100 degrees C |
8 |
| Effect of ECAP on microstructure and tensile properties of A390 aluminum alloy |
8 |
| Microstructural characterization and mechanical properties of aluminum 6061-T6 plates welded with copper insert plate (Al/Cu/Al) using friction stir welding |
8 |
| Hot deformation behavior of a Sr-modified Al-Si-Mg alloy: Constitutive model and processing maps |
8 |
| Adsorption of copper ions on porous ceramsite prepared by diatomite and tungsten residue |
8 |
| Adsorption mechanism of sodium oleate and styryl phosphonic acid on rutile and amphibole surfaces |
8 |
| Enhanced mechanical properties of lamellar Cu/Al composites processed via high-temperature accumulative roll bonding |
8 |
| Microstructure and mechanical properties of as-extruded Mg-Sn-Zn-Ca alloy with different extrusion ratios |
7 |
| Washing effect on properties of LiNi0.8Co0.15Al0.05O2 cathode material by ethanol solvent |
7 |
| Pretreatment-free Ni-P plating on magnesium alloy at low temperatures |
7 |
| Adsorption behavior and mechanism of Bi(III) ions on rutile-water interface in the presence of nonyl hydroxamic acid |
7 |
| Microstructure and wear performance of Al5083/CeO2/SiC mono and hybrid surface composites fabricated by friction stir processing |
7 |
| Effect of three-step homogenization on microstructure and properties of 7N01 aluminum alloys |
7 |
| Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties |
7 |
| Preparation and corrosion resistance of superhydrophobic coatings on AZ31 magnesium alloy |
7 |
| Microstructure and mechanical properties of FeCoCrNiMn high-entropy alloy produced by mechanical alloying and vacuum hot pressing sintering |
7 |
| Effect of strain rate on microstructural evolution and thermal stability of 1050 commercial pure aluminum |
7 |
| Pulse electroplating of Ni-W-P coating and its anti-corrosion performance |
7 |
| Effect of temperature-induced phase transitions on bioleaching of chalcopyrite |
7 |
| Modeling of dynamic recrystallization volume fraction evolution for AlCu4SiMg alloy and its application in FEM |
7 |
| Microstructure and mechanical properties of as-cast and extruded biomedical Mg-Zn-Y-Zr-Ca alloy at different temperatures |
7 |
| Superelastic properties of nanocrystalline NiTi shape memory alloy produced by thermomechanical processing |
6 |
| Effect of post-weld heat treatment on microstructure and mechanical properties of welded joints of 6061-T6 aluminum alloy |
6 |
| Tribological behavior of A356-CNT nanocomposites fabricated by various casting techniques |
6 |
| Enhanced corrosion resistance of micro-arc oxidation coated magnesium alloy by superhydrophobic Mg-Al layered double hydroxide coating |
6 |
