| Effects of thermal modification on the physical, chemical and micromechanical properties of Masson pine wood (Pinus massoniana Lamb.) |
11 |
| Characterization of moisture in acetylated and propionylated radiata pine using low-field nuclear magnetic resonance (LFNMR) relaxometry |
10 |
| Improved yield of carbon fibres from cellulose and kraft lignin |
9 |
| Surface modification of Norway spruce wood by octadecyltrichlorosilane (OTS) nanosol by dipping and water vapour diffusion properties of the OTS-modified wood |
9 |
| Mechanical, thermo-mechanical and water uptake performance of wood flour filled polyurethane elastomer eco-composites: influence of surface treatment of wood flour |
9 |
| Measurement of mechanical properties of multilayer waterborne coatings on wood by nanoindentation |
9 |
| Utilization and characterization of amino resins for the production of wood-based panels with emphasis on particleboards (PB) and medium density fibreboards (MDF). A review |
8 |
| Stress wave evaluation for predicting the properties of thermally modified wood using neuro-fuzzy and neural network modeling |
8 |
| Lignin-based carbon fibers for renewable and multifunctional lithium-ion battery electrodes |
7 |
| Analysis of extractives from Pinus halepensis and Eucalyptus camaldulensis as predominant trees in Algeria |
7 |
| Analysis of the hydrolysates from cured and uncured urea-formaldehyde (UF) resins with two F/U mole ratios |
7 |
| Accessibility of hydroxyl groups in anhydride modified wood as measured by deuterium exchange and saponification |
7 |
| Environmental sustainability assessment of HMF and FDCA production from lignocellutosic biomass through life cycle assessment (LCA) |
7 |
| Improvement of beech wood properties by in situ formation of polyesters of citric and tartaric acid in combination with glycerol |
7 |
| Characteristics of wood-silica composites influenced by the pH value of silica sols |
7 |
| Isolation and characterization of lignin from beech wood and chestnut sawdust for the preparation of lignin nanoparticles (LNPs) from wood industry side-streams |
7 |
| Direct production of lignin nanoparticles (LNPs) from wood using p-toluenesulfonic acid in an aqueous system at 80 degrees C: characterization of LNP morphology, size, and surface charge |
7 |
| Towards better UV-blocking and antioxidant performance of varnish via additives based on lignin and its colloids |
7 |
| Water vapour sorption properties of thermally modified and pressurised hot-water-extracted wood powder |
6 |
| Prediction of physical and mechanical properties of thermally modified wood based on color change evaluated by means of group method of data handling (GMDH) neural network |
6 |
| Frequency-dependent viscoelastic properties of Chinese fir (Cunninghamia lanceolata) under hygrothermal conditions. Part 1: moisture adsorption |
6 |
| Investigation of a new formaldehyde-free adhesive consisting of soybean flour and Kymene (R) 736 for interior plywood |
6 |
| Characterization of the pits in parenchyma cells of the moso bamboo [Phyllostachys edulis (Carr.) J. Houz.] culm |
6 |
| Nondestructive assessment and imaging methods for internal inspection of timber |
6 |
| Improved wood properties via two-step grafting with itaconic acid (IA) and nano-SiO2 |
6 |
| Predicting structural timber grade-determining properties using acoustic and density measurements on young Sitka spruce trees and logs |
6 |
| Influence of timber moisture content on wave time-of-flight and longitudinal natural frequency in coniferous species for different instruments |
6 |
| Penetration and distribution of paraffin wax in wood of loblolly pine and Scots pine studied by time domain NMR spectroscopy |
6 |
| Enhancing resin efficiency in plywood production via DBD plasma treatment and atomized air spray of UF resin |
5 |
| Frequency-dependent viscoetastic properties of Chinese fir (Cunninghamia lanceolata) under hygrothermal conditions. Part 2: moisture desorption |
5 |
| Radiata pine wood treatment with a dispersion of aqueous styrene/acrylic acid copolymer |
5 |
| Influence of hygrothermal condition on dynamic viscoelasticity of Chinese fir (Cunninghamia lanceolata). Part 1: moisture adsorption |
5 |
| Electrochemical oxidation of lignin for the production of value-added chemicals on Ni-Co bimetallic electrocatalysts |
5 |
| Dielectric barrier discharge (DBD) plasma pretreatment of lignocellulosic materials in air at atmospheric pressure for their improved wettability: a literature review |
5 |
| Assessing cellulose dissolution efficiency in solvent systems based on a robust experimental quantification protocol and enthalpy data |
5 |
| Changes in sorption and electrical properties of wood caused by fungal decay |
5 |
| A commercial laccase-mediator system to delignify and improve saccharification of the fast-growing Paulownia fortunei (Seem.) Hemsl |
5 |
| Effect of autohydrolysis on alkaline delignification of mixed hardwood chips and on lignin structure |
4 |
| Techno-economic feasibility of bioethanol production via biorefinery of olive tree prunings (OTP): optimization of the pretreatment stage |
4 |
| Influence of Quercus petraea Liebl. wood structure on the permeation of oxygen through wine barrel staves |
4 |
| Chemical, physico-mechanical properties and biological durability of rubberwood particleboards after post heat-treatment in palm oil |
4 |
| Visual and machine strength grading of European ash and maple for glulam application |
4 |
| Preparation of a synergistically stabilized oil-in-water paraffin Pickering emulsion for potential application in wood treatment |
4 |
| Comparison of physical and thermal properties of various wood-inorganic composites (WICs) derived by the sol-gel process |
4 |
| Lignin-based foams as insulation materials: a review |
4 |
| In-situ density estimation by four nondestructive techniques on Norway spruce from built-in wood structures |
4 |
| Antisolvent precipitation of hemicelluloses, lignosulfonates and their complexes from ultrafiltrated spent sulfite liquor (SSL) |
4 |
| Process optimization of lignin conversion into value added chemicals by thermochemical pretreatment and electrooxidation on a stainless steel anode |
4 |
| The effect of high voltage electrostatic field (HVEF) treatment on bonding interphase characteristics among different wood sections of Masson pine (Pinus massoniana Lamb.) |
4 |
| Determination of the country of origin of true mahogany (Swietenia macrophylla King) wood in five Latin American countries using handheld NIR devices and multivariate data analysis |
4 |
