| MICROSTRUCTURE, THERMO-PHYSICAL, MECHANICAL AND WEAR PROPERTIES OF IN-SITU FORMED BORON CARBIDE - ZIRCONIUM DIBORIDE COMPOSITE |
7 |
| MEAN VALUES, MOMENTS, MOMENT RATIOS AND A GENERALIZED MEAN VALUE THEOREM FOR SIZE DISTRIBUTIONS |
6 |
| FREEZE-THAW AND FIRE RESISTANCE OF GEOPOLYMER MORTAR BASED ON NATURAL AND WASTE POZZOLANS |
5 |
| COMPARISON OF KAOLIN AND KAOLINITIC CLAYSTONES AS RAW MATERIALS FOR PREPARING METAKAOLINITE-BASED GEOPOLYMERS |
5 |
| CORROSION AND OXIDATION BEHAVIOR OF POLYMER DERIVED CERAMIC COATINGS WITH PASSIVE GLASS FILLERS ON AISI 441 STAINLESS STEEL |
5 |
| THE STRUCTURE, DEGRADATION AND FIBRE DRAWING PROPERTIES OF PHOSPHATE BASED GLASSES FIBRE: THE EFFECTS OF Fe2O3 and B2O3 ADDITION |
4 |
| THE EFFECT OF NANO-TIO2 ON THE DURABILITY OF ULTRA-HIGH PERFORMANCE CONCRETE WITH AND WITHOUT A FLEXURAL LOAD |
3 |
| THE PROPERTIES AND HYDRATION OF PORTLAND CEMENT CONTAINING CALCIUM SULFOALUMINATE CEMENT |
3 |
| INFLUENCE OF THE PARTICLE SIZE DISTRIBUTION OF SILICA FLOUR ON THE MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF OIL WELL CEMENT PASTE EXPOSED TO HTHP CONDITIONS |
2 |
| PREDICTION OF CHLORIDE INGRESS IN STEEL FIBRE REINFORCED CONCRETE UNDER BENDING LOAD |
2 |
| EFFECT OF FERRITE PHASE ON THE FORMATION AND COEXISTENCE OF 3CaO center dot 3Al(2)O(3)center dot CaSO4 AND 3CaO center dot SiO2 MINERALS |
2 |
| EFFECT OF Na2B4O7 ADDITION ON THE STRUCTURE AND PROPERTIES OF Al2O3 CERAMIC-LINED STEEL PIPE PREPARED BY THE GS-SHS METHOD |
2 |
| ROLE OF GLASS MELT FLOW IN CONTAINER FURNACE EXAMINED BY MATHEMATICAL MODELLING |
2 |
| THERMAL CONDUCTIVITY OF REINFORCED GEOPOLYMER FOAMS |
2 |
| STRUCTURAL AND PHYSICAL PROPERTIES OF REFRACTORY CORDIERITE PRECURSORS PREPARED FROM RICE HUSK SILICA WITH DIFFERENT MgO ADDITION |
2 |
| WOOD CHIPS ASH PROCESSING AND ITS UTILIZATION IN MAGNESIUM PHOSPHATE CEMENT COMPOSITES |
2 |
| TEMPERATURE-DEPENDENT PROPORTIONAL LIMIT STRESS OF CARBON FIBER-REINFORCED SILICON CARBIDE CERAMIC-MATRIX COMPOSITES |
2 |
| MICROSTRUCTURE, MECHANICAL PROPERTIES AND FRICTION/WEAR BEHAVIOR OF HOT-PRESSED Si3N4/BN CERAMIC COMPOSITES |
2 |
| SYNERGISTIC EFFECTS OF FREQUENCY AND TEMPERATURE ON FATIGUE HYSTERESIS OF A CROSS-PLY SiC/MAS COMPOSITE UNDER TENSION-TENSION LOADING |
2 |
| THE EFFECT OF THE SODIUM SULPHATE SOLUTION EXPOSURE ON PROPERTIES AND MECHANICAL RESISTANCE OF DIFFERENT KINDS OF RENDERS |
2 |
| TIME-DEPENDENT MATRIX MULTI-FRACTURE OF SiC/SiC CERAMIC-MATRIX COMPOSITES CONSIDERING INTERFACE OXIDATION |
2 |
| THE EFFECT OF THE pH VALUES AND SINTERING TEMPERATURES ON THE PHYSICAL, STRUCTURAL AND MECHANICAL PROPERTIES OF NANO HYDROXYAPATITE DERIVED FROM ARK CLAM SHELLS (ANADARA GRANOSA) PREPARED VIA THE WET CHEMICAL PRECIPITATE METHOD |
1 |
| MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ANNEALED WC/C COATINGS DEPOSITED WITH DIFFERENT GAS MIXTURES IN AN RFMS PROCESS |
1 |
| SPECIFICATION OF MgO-CONCENTRATE OBTAINED FROM POST MORTEM MgO-C REFRACTORY MATERIALS |
1 |
| PROPERTIES AND MICRO-STRUCTURE ASSESSMENT OF BUILDING MATERIALS BASED ON FLUE GAS DESULFURISATION GYPSUM MODIFIED BY CEMENT AND INDUSTRIAL WASTE |
1 |
| REFRACTORY CERAMICS SYNTHESIS BY SOLID-STATE REACTION BETWEEN CaCO3 (MOLLUSK SHELL) AND Al2O3 POWDERS |
1 |
| SOME DURABILITY PROPERTIES OF ALKALI ACTIVATED MATERIALS (AAM) PRODUCED WITH CERAMIC POWDER AND MICRO CALCITE |
1 |
| ARCHAEOMETRIC STUDY OF ANCIENT MAYA FIGURINES FROM THE COLLECTION OF THE NATIONAL MUSEUM |
1 |
| THE EFFECT OF SUPERPLASTICIZERS ON THE PROPERTIES OF GAMMA IRRADIATED CEMENT PASTES |
1 |
| THERMAL SHOCK BEHAVIOR OF MIXED COMPOSITE TOP COAT APS TBCs |
1 |
| STRUCTURAL AND LUMINESCENT PROPERTIES OF EUROPIUM-DOPED AND UNDOPED HYDROXYAPATITE POWDERS SINTERED BY SPARK PLASMA |
1 |
| Nd2O3 DOPED YTTRIA STABILIZED ZIRCONIA CERAMICS FABRICATED BY CONVENTIONAL AND MICROWAVE SINTERING METHODS |
1 |
| MODELLING MATRIX MULTI-CRACKING EVOLUTION OF FIBRE-REINFORCED CERAMIC-MATRIX COMPOSITES CONSIDERING FIBRE FRACTURE |
1 |
| PREPARATION AND CHARACTERIZATION OF DRY PRESSED CERAMIC TILES INCORPORATING CERAMIC SLUDGE WASTE |
1 |
| LANTHANIDE-DOPED Y2O3- THE PHOTOLUMINESCENT AND RADIOLUMINESCENT PROPERTIES OF SOL-GEL PREPARED SAMPLES |
1 |
| EFFECTS OF NH4HCO3 CONTENTS ON THE PROPERTIES OF SiC POROUS CERAMICS REINFORCED WITH WHISKER |
1 |
| SYNTHESIS OF ALUMINIUM BORATE WHISKERS THROUGH WET MOLTEN SALT METHOD |
1 |
| THE EFFECT OF PRESSURE, BIAS VOLTAGE AND ANNEALING TEMPERATURE ON N-2 AND N-2 + SiH4 DOPED WC/C DC MAGNETRON SPUTTERED LAYERS |
1 |
| ELECTROPHORETIC DEPOSITION OF BiVO4 LAYERS ON FTO SUBSTRATES FOR PHOTO ELECTRO-CHEMICAL CELLS |
1 |
| STRATEGIES OF FABRICATING GRAPHENE AND GRAPHENE-ANALOGOUS 2D NANOSHEETS |
1 |
| LIGHTWEIGHT CONCRETE MADE WITH WASTE EXPANDED POLYPROPYLENE-BASED AGGREGATE AND SYNTHETIC COAGULATED AMORPHOUS SILICA |
1 |
| MODELING IN-PHASE THERMOMECHANICAL FATIGUE HYSTERESIS LOOPS OF FIBER-REINFORCED CERAMIC-MATRIX COMPOSITES |
1 |
| EFFECT OF MgO ON CALCINATION AND PROPERTIES OF BELITE-BARIUM CALCIUM SULPHOALUMINATE CEMENT CLINKER WITH Na2O AND K2O |
1 |
| STRUCTURE, GLASS STABILITY AND RHEOLOGICAL PROPERTIES OF Na2O-CaO-Al2O3-SiO2 GLASSES DOPED WITH Y2O3 |
1 |
| EFFECT OF SYNTHESIS TEMPERATURE ON MORPHOLOGY AND STRUCTURAL CHARACTERISTICS OF HYDROXYAPATITE WHISKERS |
1 |
| THE RELEASE OF CHLORIDE IONS FROM CONVENTIONAL GLASS-IONOMER CEMENTS |
1 |
| RECYCLING OF COAL GANGUE TO PREPARE LOW DENSITY CERAMIC PROPPANTS FOR COAL BED METHANE WELLS |
1 |
| THE EFFECT OF SILICA FUME ON THE DURABILITY OF MAGNESIUM OXYCHLORIDE CEMENT |
1 |
| TRIBOLOGICAL INVESTIGATION OF BORON CARBIDE FILMS SLIDING AGAINST DIFFERENT MATING MATERIALS UNDER HIGH RELATIVE HUMIDITY |
1 |
| MULTI-INSTRUMENTAL CHARACTERISATION OF DECORATIVE LAYERS IN GLAZED CERAMIC RELIEFS FROM THE SCHWARZENBERG PALACE IN PRAGUE |
1 |
