| Deposition of AA5083-H112 Over AA2024-T3 by Friction Surfacing |
5 |
| Application of the Response Surface Methodology for Optimization of the Resistance Spot Welding Process in AISI 1006 Galvanized Steel |
3 |
| Influence of the Aluminium Alloy Type on Defects Formation in Friction Stir Lap Welding of Thin Sheets |
2 |
| Residual Stresses in Arc Welding: A Holistic Vision |
2 |
| Simulation of Flash-Butt Welding Process of a Railway Steel. Part 1: Residual Stress Analysis Via FEM |
2 |
| Development and Evaluation of Wire Feeding Pulsing Techniques for Arc Welding |
2 |
| Finite Element Simulation of Welding Distortion in Dissimilar Joint by Inherent Deformation Method |
2 |
| Metallurgical Characterization of Dissimilar Joints Inconel 718-Inox 316L Welded by the Autogenous TIG Process |
2 |
| Heat Inputs Adjustment Corresponding to the HAZ Cooling Times in GMAW on 2205 Duplex Steel Using Finite Element Simulation |
2 |
| Formability of in-situ Austempered Transformation-induced Plasticity Steels After Laser Beam Welding |
1 |
| Variation Causes Analysis Attributed to Different Metrological Instruments to Verify the Geometric Characteristics of a Spot Welding Process |
1 |
| Additive Techniques to Refurbish Ni Based Components |
1 |
| Influence of Welding Thermal Cycle on Grain Growth, Microstructural Transformations and MA Formation on CGHAZ of TMCP Steel |
1 |
| Behavior of the C-Mn Steel Welded Joints Obtained by GMAW-RE Process with Rotating Electrode |
1 |
| Influence of the Heat Flow Transient State on the Microstructure and Microhardness of ASTM-A36 and SAE-1045 Steels Welded by GMAW Process |
1 |
| Keyhole GTAW with Dynamic Wire Feeding Applied to Orbital Welding of 304L SS Pipes |
1 |
| Comparison of Aluminum Based Alloys Reinforced with Intermetallic Developed by Powder Metallurgy and Arc Melting Routes |
1 |
| Corrosion Resistance of Dissimilar Joints of AISI 316L and Inconel 718 Alloys |
1 |
| Operational Aspects of Underwater Wet Welding with Austenitic Stainless Steel Coated Electrodes |
1 |
| A Contribution in the Determination of the Pulsed Current Variables for the E71T-1M Tubular Wire |
1 |
| Analysis of 3D Planar Laminations in a Welded Section of API 5L X52 Applying the Finite Element Method |
1 |
| Evaluation of Oscillation Movement in Submerged Arc Welding |
1 |
| Parameter Optimization: Force (F), Time (T) and Current Intensity (I), in the RSW Welding Process of DP-290 Steel Plates Using the Taguchi Method |
1 |
| An Evaluation of the High Strength Cast Steel Welded Joints for Offshore Industry |
1 |
| Thermal Dissipation Effect on Temperature-controlled Friction Stir Welding |
0 |
| Effect of Propylene Addition to Conventional Shielding Gases on GMAW Applied to Top and Angle Joints |
0 |
| Influence of Resulting Microstructures on Abrasive and Sliding Wear of a Structural ASTM A242 Steel Welded by GMAW |
0 |
| Analysis of the Influence of Welding Parameters on Microstructures and Mechanical Properties of Welding Joints of an API X70Q Steel Tube for the Sour Service Application |
0 |
| Microstructure and Mechanical Characteristics of the Welding Zone of a Shipbuilding Steel Welded in Submerged Arc Welding with Very High Heat Input |
0 |
| Characterization by Three-Dimensional Reconstruction of the Fatigue Fracture Surface in Underwater Wet Welds |
0 |
| Hydrogen Cracking in an API 5L X70 Steel Welded with Cellulosic Electrodes of Different Levels of Mechanical Resistance |
0 |
| Efficacy Assessment of Wire Cleaning and Lubrification on MIG/MAG Feedability |
0 |
| The Influence of the Welding Energy on the Residual Stress and Magnetic Properties of Steel AISI 444 Welded by the RSW Process |
0 |
| Mechanical and Fatigue Strength Assessment of Friction Stir Welded Plates of Magnesium Alloy AZ31B |
0 |
| Influence of Welding Parameters on Aluminum Tubes AA6063 by the CDFW Process |
0 |
| Time of Flight Diffraction Technique (ToFD) Assists in Quality Assurance of Parts Production and Mechanical Structures |
0 |
| Influence of Shielding Gas in FCAW Process Welding of UNS S31803 with E2209-T1/4 Wire |
0 |
| Study of Magnetic Fields Issued in Welding Processes Coated Electrode and TIG |
0 |
| Evaluation of Heat Input and Cold Wire Addition on Dimensional, Chemical and Metallurgical Characteristics of The Weld Metal Obtained by Submerged Arc Welding in UNS S32304 Lean Duplex Steel |
0 |
| IN625 Multilayers Characterization Deposited by CMT |
0 |
| Temperature Distribution Prediction in 5052 H34 Aluminum Alloy Joints Welded by Friction Stir Welding Process |
0 |
| Flux for Hardfacing by Submerged Arc Welding from Ferrochrome-manganese and Slag from the Simultaneous Reduction of Chromite and Pyrolusite |
0 |
| Mechanical Characterization and Micro-structural Analysis of Plates Obtained by the Tailor Welded Blank process (TWB) |
0 |
| Applied Methodology for Qualification of Welding Procedures of Industrial Pipes According to ASME B 31.3 and ASME SECTION IX |
0 |
| Influence of Nb Content on Sensitization and Pitting Corrosion of Welded AISI 430 Ferritic Stainless Steel |
0 |
| Proposition of an Empirical Model for Determination of Critical Temperatures During Continuous Cooling in Heat Affected Zones of IF Steels Welded by the TIG Process |
0 |
| Automatic Capacitive Welding Equipment for Thermocouples |
0 |
| Investigation of Bubbles Phenomenon in Underwater Wet Welding with Self-Protected Tubular Wire |
0 |
| Behaviors of Embrittlement and Softening in Heat Affected Zone of High Strength X90 Pipeline Steels |
0 |
| Development and Evaluation of a Smart Welding Torch |
0 |
