| Nanosecond Laser Irradiation as New Route for Silver Nanoparticles Precipitation in Glassy Matrix |
22 |
| Investigation of Mechanical Properties of Aluminium 6061-Silicon Carbide, Boron Carbide Metal Matrix Composite |
22 |
| Aluminum Silicon Carbide Particulate Metal Matrix Composite Development Via Stir Casting Processing |
20 |
| Dry Sliding Friction and Wear Behavior of AA7075-Si3N4 Composite |
19 |
| An Economical Approach for the Recycling of High-Purity Silicon from Diamond-Wire Saw Kerf Slurry Waste |
16 |
| X-ray diffraction and thermodynamics kinetics of SiB6 under gamma irradiation dose |
15 |
| A Comparative Investigation on Bioactivity and Antibacterial Properties of Sol-Gel Derived 58S Bioactive Glass Substituted by Ag and Zn |
15 |
| Investigations on Characterization and Properties of Al-MoO3 Composites Synthesized Using Powder Metallurgy Technique |
13 |
| Effects of Environmental Conditions on Erosion Wear of Eggshell Particulate Epoxy Composites |
12 |
| TFET on Selective Buried Oxide (SELBOX) Substrate with Improved I-ON/I-OFF Ratio and Reduced Ambipolar Current |
12 |
| Effects of Silicon Carbide and Tungsten Carbide in Aluminium Metal Matrix Composites |
12 |
| Silicon Recovery from Kerf Slurry Waste: a Review of Current Status and Perspective |
11 |
| Multi-Response Optimization on Mechanical Properties of Silica Fly Ash Filled Polyester Composites Using Taguchi-Grey Relational Analysis |
11 |
| Analysis and Optimization of WEDM Performance Characteristics of Inconel 706 for Aerospace Application |
11 |
| Adsorption Removal of Safranin Dye Contaminants from Water Using Various Types of Natural Zeolite |
11 |
| Surface Potential Modeling of Graded-Channel Gate-Stack (GCGS) High-K Dielectric Dual-Material Double-Gate (DMDG) MOSFET and Analog/RF Performance Study |
10 |
| Physical and Structural Properties of Lithium Borate Glasses Containing MoO3 |
10 |
| Magnetic Aluminosilicate Nanoclay: a Natural and Efficient Nanocatalyst for the Green Synthesis of 4H-Pyran Derivatives |
10 |
| Compatibility and Bone Bonding Efficiency of Gamma Irradiated Hench's Bioglass |
9 |
| Preparation, Mechanical and Antimicrobial Properties of SiO2/Poly(butylene adipate-co-terephthalate) Films for Active Food Packaging |
9 |
| Role of Temperature on the Phase Modification of TiO2 Nanoparticles Synthesized by the Precipitation Method |
9 |
| Silicification in Leaves of Sorghum Mutant with Low Silicon Accumulation |
9 |
| Effect of Silane Modified E-glass Fibre/Iron(III)Oxide Reinforcements on UP Blended Epoxy Resin Hybrid Composite |
9 |
| Study on Tribological Behaviour of Al/SiC/MoS2 Hybrid Metal Matrix Composites in High Temperature Environmental Condition |
9 |
| Effects of Tool Electrode on EDM Performance of Ti-6Al-4V |
9 |
| Protective Role of Silicon (Si) Against Combined Stress of Salinity and Boron (B) Toxicity by Improving Antioxidant Enzymes Activity in Rice |
9 |
| Solar Light Photodetectors Based on Nanocrystalline Zinc Oxide Cadmium Doped/p-Si Heterojunctions |
9 |
| Influence of Silicon Fertilization on Maize Performance Under Limited Water Supply |
9 |
| Preliminary Evaluations on Development of Recycled Porcelain Reinforced LM-26/Al-Si10Cu3Mg1 Alloy for Piston Materials |
9 |
| Effects of Annealing Temperatures on the Structural and Dielectric Properties of ZnO Nanoparticles |
9 |
| Friction and Wear Behavior of AA 7075-Si3N4 Composites Under Dry Conditions: Effect of Sliding Speed |
9 |
| Development of Silicon Carbide Reinforced Jute Epoxy Composites: Physical, Mechanical and Thermo-mechanical Characterizations |
8 |
| Synthesis of 2-amino-6-diarylnicotinonitrile in the presence of CoFe2O4@SiO2-SO3H as a reusable solid acid nanocatalyst under microwave irradiation in solvent-freeconditions |
8 |
| Mechanical Strength Behaviour of Silane Treated E-glass Fibre/Al 6061 & SS-304 Wire Mesh Reinforced Epoxy Resin Hybrid Composite |
8 |
| Magnetic Field Influence on Surface Modifications in Powder Mixed EDM |
8 |
| Tetramethylguanidine-Functionalized Fe3O4/Chloro-Silane Core-Shell Nanoparticles: an Efficient Heterogeneous and Reusable Organocatalyst for Aldol Reaction |
8 |
| Impact of Nozzle Design on Surface Roughness of Abrasive Jet Machined Glass Fibre Reinforced Polymer Composites |
8 |
| Tribological Characteristics of LM13/Si3N4/Gr Hybrid Composite at Elevated Temperature |
8 |
| Synthesis, Characterization and Wire Electric Erosion Behaviour of AA7178-10 wt.% ZrB2 Composite |
8 |
| Tribology Analysis of Cobalt Particulate Filled Al 7075 Alloy for Gear Materials: a Comparative Study |
8 |
| Pongamia Pinnata as a Green Corrosion Inhibitor for Mild Steel in 1N Sulfuric Acid Medium |
8 |
| Imidazole-Functionalized Fe3O4/Chloro-Silane Core-Shell Nanoparticles: an Efficient Heterogeneous Organocatalyst for Esterification Reaction |
8 |
| Experimental Investigation of Mechanical and Morphological Properties of Flax-Glass Fiber Reinforced Hybrid Composite using Finite Element Analysis |
8 |
| From Metallurgical-Grade to Solar-Grade Silicon: An Overview |
8 |
| Electro-Discharge Machining of Inconel 825 Super alloy: Effects of Tool Material and Dielectric Flushing |
7 |
| Effects of the Nanoclay and Crosslinking Systems on the Mechanical Properties of Ethylene-propylene-diene Monomer/styrene Butadiene Rubber Blends Nanocomposite |
7 |
| Mechanical Properties and Wear Behavior of Zn and MoS2 Reinforced Surface Composite Al-Si Alloys Using Friction Stir Processing |
7 |
| Effect of Variable Thermal Conductivity during the Photothermal Diffusion Process of Semiconductor Medium |
7 |
| Sulfonic Acid-Functionalized Silica-Coated Magnetic Nanoparticles as a Reusable Catalyst for the Preparation of Pyrrolidinone Derivatives Under Eco-Friendly Conditions |
7 |
| Enhancement of a Nanoscale Novel Esaki Tunneling Diode Source TFET (ETDS-TFET) for Low-Voltage Operations |
7 |
