| A review of fault detection and diagnostics methods for building systems |
38 |
| Development of a sun-shading louver unit with evaporative cooling effect |
16 |
| Investigation of temperature regulation effects on indoor thermal comfort, air quality, and energy savings toward green residential buildings |
14 |
| Window and door opening behavior, carbon dioxide concentration, temperature, and energy use during the heating season in classrooms with different ventilation retrofitsASHRAE RP1624 |
8 |
| Development and implementation of a thermostat learning algorithm |
8 |
| Do building energy codes adequately reward buildings that adapt to partial occupancy? |
7 |
| Development of a standard capture efficiency test method for residential kitchen ventilation |
7 |
| Comfort and energy performance analysis of different glazing systems coupled with three shading control strategies |
7 |
| Performance of various commercial TiO2 in photocatalytic degradation of a mixture of indoor air pollutants: Effect of photocatalyst and operating parameters |
7 |
| A method to generate design-sensitive occupant-related schedules for building performance simulations |
6 |
| Development of New Low-GWP Refrigerants-Refrigerant Mixtures Including HFO-1123 |
6 |
| Study of the thermal performance of a new type of floor heating and resulting indoor thermal comfort |
5 |
| Sensor networks for routine indoor air quality monitoring in buildings: Impacts of placement, accuracy, and number of sensors |
5 |
| Coordinate control of air movement for optimal thermal comfort |
5 |
| Ventilation strategies and air quality management in passenger aircraft cabins: A review of experimental approaches and numerical simulations |
4 |
| IAQ and energy implications of high efficiency filters in residential buildings: A review (RP-1649) |
4 |
| Development of prototypical buildings for urban scale building energy modeling: A reduced order energy model approach |
4 |
| User interaction patterns of a personal cooling system: A measurement study |
4 |
| Airborne nanoparticles filtration performance of fibrous media: A review |
4 |
| Fouling and Its Effects on Air-cooled Condensers in Split System Air Conditioners (RP-1705) |
4 |
| Energy savings and risk of mold growth in apartments renovated with internal insulation |
4 |
| Comparative study of probabilistic neural network and back propagation network for fault diagnosis of refrigeration systems |
4 |
| Detection and interpretation of anomalies in building energy use through inverse modeling |
4 |
| Efficient g-function approximation with artificial neural networks for a varying number of boreholes on a regular or irregular layout |
3 |
| Policy recommendations for using cool thermal energy storage to increase grid penetration of renewable power sources (1607-RP) |
3 |
| Development of an aerogel-based thermal coating for the energy retrofit and the prevention of condensation risk in existing buildings |
3 |
| Indoor environment in children's dwellings in Dalian and Beijing, China |
3 |
| Theoretical and experimental analysis of a vertical direct expansion geothermal evaporator using CO2 as refrigerant |
3 |
| The impact of rock fracturing and pump intake location on the thermal recovery of a standing column well: model development, experimental validation, and numerical analysis |
3 |
| Impact of chilled ceiling in a high sensible cooling load room with underfloor air distribution |
3 |
| Are aircraft acceleration-induced body forces effective on contaminant dispersion in passenger aircraft cabins? |
3 |
| Meta-analysis of summertime indoor temperatures in new-build, retrofitted, and existing UK dwellings |
3 |
| Energy-optimized versus cost-optimized design of high-performing dwellings: The case of multifamily buildings |
3 |
| Bio-based and recycled-waste materials in buildings: A study of energy performance of hemp-lime concrete and recycled-polyethylene terephthalate facades for office facilities in France and Italy |
3 |
| Insights into parameter estimation for thermal response tests on borehole heat exchangers |
3 |
| Evaluation of regression and neural network models for solar forecasting over different short-term horizons |
3 |
| Feasibility analysis of the hybrid dehumidifier-air conditioner technology for small-scale household applications in the tropics |
3 |
| Thermal and sound insulation of lightweight steel-framed facade walls |
3 |
| Filtration of nanoparticles applied in general ventilation |
3 |
| Field study of different thermal requirements based on the indoor activities patterns of rural residents in winter in Northwest China |
3 |
| Event-driven optimal control of central air-conditioning systems: Event-space establishment |
3 |
| Development of a distributed artificial fish swarm algorithm to optimize pumps working in parallel mode |
2 |
| Update to office equipment diversity and load factors (ASHRAE 1742-RP) |
2 |
| Evaluating indoor air quality and energy impacts of ventilation in a net-zero energy house using a coupled model |
2 |
| Indoor air quality and wildfire smoke impacts in the Pacific Northwest |
2 |
| Stochastic multicriteria evaluation of district heating systems considering the uncertainties |
2 |
| Influence of potential liquid desiccants on solution cooling, heating, and pumping loads of membrane-based liquid desiccant air conditioning system: An analytical study |
2 |
| Application of absorption heat pump and direct-contact total heat exchanger to advanced-recovery flue-gas waste heat for gas boiler |
2 |
| Management of cooling energy through building controls for thermal comfort and relative performance in an office building |
2 |
| Load-based testing methodology for fixed-speed and variable-speed unitary air conditioning equipment |
2 |
