| Principles of aerosol jet printing |
22 |
| Ultra-sensitive protein detection with organic electrochemical transistors printed on plastic substrates |
17 |
| Laser-induced electrodes towards low-cost flexible UV ZnO sensors |
13 |
| Organic photodiodes: printing, coating, benchmarks, and applications |
11 |
| Fully printed all-polymer tattoo/textile electronics for electromyography |
10 |
| Label free urea biosensor based on organic electrochemical transistors |
9 |
| Slot-die processing and encapsulation of non-fullerene based ITO-free organic solar cells and modules |
9 |
| Flexible NO2 gas sensor based on single-walled carbon nanotubes on polytetrafluoroethylene substrates |
7 |
| Electronic biosensing with flexible organic transistor devices |
7 |
| Photocurrent study of all-printed photodetectors on paper made of different transition metal dichalcogenide nanosheets |
7 |
| All-printed low-power metal oxide gas sensors on polymeric substrates |
7 |
| Guided ink and process design for aerosol jet printing based on annular drying effects |
7 |
| Fully printed, high energy density flexible zinc-air batteries based on solid polymer electrolytes and a hierarchical catalyst current collector |
7 |
| Flexible fiber-shaped energy storage devices: principles, progress, applications and challenges |
7 |
| Super-flexible perovskite solar cells with high power-per-weight on 17 mu m thick PET substrate utilizing printed Ag nanowires bottom and top electrodes |
6 |
| Roll-to-roll processing of film substrates for hybrid integrated flexible electronics |
6 |
| Reconfigurable electronic devices enabled by laser-sintered liquid metal nanoparticles |
5 |
| Wireless smartphone-assisted personal healthcare monitoring system using a MoS2-based flexible, wearable and ultra-low-cost functional sensor |
5 |
| Inkjet printing and characterisation of a resistive temperature sensor on paper substrate |
5 |
| Highly stretchable polystyrene sulfonate organic electrochemical transistors achieved via polyethylene glycol addition |
5 |
| Self-aligned inkjet printing of resistors and low-pass resistor-capacitor filters on roll-to-roll imprinted plastics with resistances ranging from 10 to 10(6)Omega |
5 |
| Synaptic response in organic electrochemical transistor gated by a graphene electrode |
5 |
| Impact of contact overlap on transconductance and noise in organic electrochemical transistors |
5 |
| The effect of electrode calendering on the performance of fully printed Zn vertical bar MnO2 batteries |
4 |
| Characterization of &ITin situ&IT sintering of silver nanoparticles on commercial photo papers in inkjet printing |
4 |
| Directly 3D-printed monolithic soft robotic gripper with liquid metal microchannels for tactile sensing |
4 |
| Stress-adaptive meander track for stretchable electronics |
4 |
| Theoretical frequency limit of organic field-effect transistors |
4 |
| Adaptable pressure textile sensors based on a conductive polymer |
4 |
| Self-aligned capillarity-assisted printing of top-gate thin-film transistors on plastic |
4 |
| Low-profile flexible frequency-reconfigurable millimetre-wave antenna for 5G applications |
4 |
| Printed facial skin electrodes as sensors of emotional affect |
4 |
| Supercapacitors on demand: all-printed energy storage devices with adaptable design |
4 |
| Direct writing of silver nanowire-based ink for flexible transparent capacitive touch pad |
3 |
| A flexible pressure sensor by induced ordered nano cracks filled with multilayer graphene oxide composite film as a conductive fine-wire network for higher sensitivity |
3 |
| Nanocellulose-polyurethane substrate material with tunable mechanical properties for wearable electronics |
3 |
| Experimental and modeling study of low-voltage field-effect transistors fabricated with molecularly aligned copolymer floating films |
3 |
| Formulation and optimization of a zinc oxide nanoparticle ink for printed electronics applications |
3 |
| Parameter evaluation of printed primary Zn/MnO2 batteries with nonwoven and hydrogel separators |
3 |
| Stretchable metal films |
3 |
| Quality assurance for rotary screen printed wiring backplanes with automated roll-to-roll electrical test equipment |
2 |
| Microwave performance of flexo-printed chipless RFID tags |
2 |
| Application of dye-sensitized and perovskite solar cells on flexible substrates |
2 |
| High speed nozzle jet printing for bendable organic light emitting diodes |
2 |
| A flexible RF energy harvester using a hybrid printing technology for 'stand-alone' wireless sensor platforms |
2 |
| Integrated capacitive sensor devices aerosol jet printed on 3D objects |
2 |
| BMP-2 functionalized PEDOT:PSS-based OECTs for stem cell osteogenic differentiation monitoring |
2 |
| Roll-to-roll micro-gravure printed P3HT:PCBM organic solar cells |
2 |
| Up-scalable ITO-free organic light emitting diodes based on embedded inkjet-printed copper grids |
2 |
| A printed wireless fluidic pressure sensor |
2 |
