| Beyond the lateral flow assay: A review of paper-based microfluidics |
40 |
| 3D printed microfluidics and microelectronics |
36 |
| Brain-inspired computing with resistive switching memory (RRAM): Devices, synapses and neural networks |
36 |
| Emerging trends in wide band gap semiconductors (SiC and GaN) technology for power devices |
32 |
| Focused electron beam induced deposition meets materials science |
29 |
| Micropumps and biomedical applications - A review |
25 |
| Conduction mechanisms, dynamics and stability in ReRAMs |
17 |
| Beyond 100 nm resolution in 3D laser lithography - Post processing solutions |
17 |
| Microfluidic platforms for cell cultures and investigations |
17 |
| Using block copolymers as infiltration sites for development of future nanoelectronic devices: Achievements, barriers, and opportunities |
11 |
| Yttria-stabilized zirconia cross-point memristive devices for neuromorphic applications |
11 |
| Impedimetric nanoparticle aptasensor for selective and label free pesticide detection |
10 |
| Atmospheric plasma etching of polymers: A palette of applications in cleaning/ashing, pattern formation, nanotexturing and superhydrophobic surface fabrication |
10 |
| DREM: Infinite etch selectivity and optimized scallop size distribution with conventional photoresists in an adapted multiplexed Bosch DRIE |
9 |
| Molecularly imprinted polymers for the selective detection of multi-analyte neurotransmitters |
9 |
| Enhancement of hardness of bulk solder by doping Cu nanoparticles at the interface of Sn/Cu solder joint |
9 |
| Optical fiber based humidity sensor using Ag decorated ZnO nanorods |
8 |
| Carry save adder and carry look ahead adder using inverter chain based coplanar QCA full adder for low energy dissipation |
8 |
| Biodegradable polymer material based smart stent: Wireless pressure sensor and 3D printed stent |
8 |
| Drug loaded biodegradable polymer microneedles fabricated by hot embossing |
8 |
| A novel fault tolerant majority gate in quantum-dot cellular automata to create a revolution in design of fault tolerant nanostructures, with physical verification |
7 |
| Towards sub-micrometer high aspect ratio X-ray gratings by atomic layer deposition of iridium |
7 |
| Room-temperature bonding of single-crystal diamond and Si using Au/Au atomic diffusion bonding in atmospheric air |
7 |
| Exploiting atomic layer deposition for fabricating sub-10 nm X-ray lenses |
7 |
| Spike-timing-dependent plasticity of polyaniline-based memristive element |
7 |
| Parasitic parameters of thin film structures created on flexible substrates in PVD process |
7 |
| Theoretical study of H-2 adsorbed on monolayer MoS2 doped with N, Si, P |
7 |
| Ferroelectricity of HfxZr1-xO2 thin films fabricated by 300 degrees C low temperature process with plasma-enhanced atomic layer deposition |
7 |
| Manipulation schemes and applications of liquid marbles for micro total analysis systems |
7 |
| Micro- and nanofabrication NMR technologies for point-of-care medical applications - A review |
7 |
| Rice paper-based biodegradable triboelectric nanogenerator |
7 |
| Creep life prediction for Sn-5Sb lead-free solder alloy: Model and experiment |
6 |
| Characterization and modeling of 2DEG mobility in AlGaN/AlN/GaN MIS-HEMT |
6 |
| Enhancing adhesion strength of photonic sintered screen-printed Ag circuit by atmospheric pressure plasma |
6 |
| 3D Bioprinting and its application to organ-on-a-chip |
6 |
| Design of a high performance CNTFET-based full adder cell applicable in: Carry ripple, carry select and carry skip adders |
6 |
| Quantification of shear induced agglomeration in chemical mechanical polishing slurries under different chemical environments |
6 |
| Schottky barrier height at metal/ZnO interface: A first-principles study |
6 |
| Analysis of the statistics of device-to-device and cycle-to-cycle variability in TiN/Ti/Al:HfO2/TiN RRAMs |
6 |
| Role of highly doped Si substrate in bipolar resistive switching of silicon nitride MIS-capacitors |
6 |
| Droplet impinging behavior on surfaces with wettability contrasts |
6 |
| Optimization of a suspended two photon polymerized microfluidic filtration system |
6 |
| Improved development procedure to enhance the stability of microstructures created by two-photon polymerization |
6 |
| Fabrication of suspended microchannel resonators with integrated piezoelectric transduction |
6 |
| Investigation of the multilevel capability of TiN/Ti/HfO2/W resistive switching devices by sweep and pulse programming |
5 |
| Unbiased roughness measurements: Subtracting out SEM effects |
5 |
| Sub-10 nm electron and helium ion beam lithography using a recently developed alumina resist |
5 |
| UV-curable nanoimprint resist with liquid volume-expanding monomers |
5 |
| Heart on a chip: Micro-nanofabrication and microfluidics steering the future of cardiac tissue engineering |
5 |
| Non-contact magnetic cantilever-type piezoelectric energy harvester for rotational mechanism |
5 |
